Using SupaNova
Using a premium grade snow foam is the safest touch-less way to effectively pre-wash and clean your vehicles exterior further minimizing wash induced micro scratches and marring.
Maintenance wash?
Apply a thick even layer or blanket of snow-foam across your vehicle paintwork, bodywork trim and wheels allowing the foam to cling to the surface before leaving it to dwell for approximately 5 minutes or so, then proceed to rinse thoroughly. Always apply to a pre-washed surface for the best results.
Skipped a maintenance wash?
To avoid further unnecessary wash induced micro scratches and marring just follow this rule! “Foam – Rinse – Repeat” before proceeding with the bucket method / hand wash technique, if required.
TIP - Before proceeding with a hand wash apply a thick layer of foam to minimise surface contact.
1.
Cling: When SupaNova clings to the surface (like a blanket) it’s working its hardest to safely loosen and dissolve the heavier built up road grime and contaminants.
TIP – Applying evenly from the lower panels upwards provides consistency in surface dwell time and greater opportunity for the secondary layer to cling.
2.
Dwell: The longer you can allow the snow foam to surface dwell (a good soak) the better. On average we recommend approximately 5 minutes or so to a good pre-washed surface for the best results.
3.
Rinse: Once the snow foam has broken down all those nasty contaminants you can safely rinse them away the touch-less way without the need to rub them deeper into the paintwork when proceeding with a hand wash.
Always thoroughly pressure wash and rinse off your vehicle in a cool shaded area. Avoid washing in direct sunlight. Paintwork should be cool to touch before proceeding with the above.
Recommended use
SupaNova snow foam is ready to use. We recommend the following mix ratios. Snow foam / Dwell / Rinse / Repeat.*
*Dilution ratios are a guide only.
Concentrate : Water
Premium Snow Foam Lance 1:9
Bucket Method / Hand Wash Technique 1:50 (mix a small amount with clean water)
We also recommend using our premium grade foam gun lance with adjustable water and air mixture, full adjustable fan blades and is psi rated. Available for purchase in our online shop.
